1/2" Carbide Rougher Series 3097 4FL SE
Brand: Guhring, Diameter: 1/2", Shank: 1/2", LOC: 1", OAL: 3", Helix: 30°, Series: 3097, # of Flutes: 4, # of Ends: Single End, End Type: Chamfer .020", Material: Carbide, Coating: Firex
Item #: GUH 9030970127000
Guhring Series 3097 RS100 U Aero-Rough 48 Carbide Roughing End Mills
FIREX® Coated
RS 100 high-performance roughing cutters benefit from a completely new roughing geometry, considerably reducing surface finish wear thanks to its unequal spacing. The result is a drastic increase in tool life compared to conventional round knuckle-type geometries and an improvement in the surface finish quality of the workpiece, so that in many applications finishing operations are unnecessary and the machining cost per workpiece is vastly reduced. Designed for maximum efficiency in aerospace alloys such as Stainless Steel, Titanium and Inconel.
FIREX® Coated
- Type NF Truncated Tooth Profile
- 30° Helix Angle
- Square end with corner chamfer
RS 100 high-performance roughing cutters benefit from a completely new roughing geometry, considerably reducing surface finish wear thanks to its unequal spacing. The result is a drastic increase in tool life compared to conventional round knuckle-type geometries and an improvement in the surface finish quality of the workpiece, so that in many applications finishing operations are unnecessary and the machining cost per workpiece is vastly reduced. Designed for maximum efficiency in aerospace alloys such as Stainless Steel, Titanium and Inconel.
Item Specifications
-
Guhring
-
SS, Titanium & HT Alloys
-
Firex
-
1/2"
-
Chamfer End
-
2xD
-
1"
-
Carbide
-
Single End
-
4
-
3"
-
1/2"