0-1" Mul-T-Anvil Micrometer w/Case
Brand: Starrett®, Range: 0 - 1", Graduation: .001", Accuracy: +/-. 0002", Thimble Type: Ratchet, Measuring Faces: Carbide, Anvil Type: Round & Flat
Item #: STA 220XRL-1
Starrett Series 220 Mul-T-Anvil Micrometer
With Round and Flat Anvils
This micrometer will handle a wide variety of measurements impossible to obtain with regular micrometers, such as measuring the wall thickness of tubing, cylindrical walls from a hole or slot to an edge, many hard-to-reach locations, and the thickness of screw heads, shoulder lengths, etc. A most interesting feature of this tool is that additional anvils of various shapes can be made up, and many of these anvils do not have to be hardened for that “special job”.
Two hardened anvils furnished – round anvil approximately .120" diameter (3mm) and flat anvil approximately .125" (3mm) and.060" (1 5mm) thick
With Round and Flat Anvils
- "V” Anvil for measuring thickness of screw heads and shoulder lengths available separately
- Accommodates special anvils up to 5/16" (8mm) thick
- Can be used as a height gage by removing the vise jaw
- Tool is accurate to ±. 0002" or ± 0. 004mm
This micrometer will handle a wide variety of measurements impossible to obtain with regular micrometers, such as measuring the wall thickness of tubing, cylindrical walls from a hole or slot to an edge, many hard-to-reach locations, and the thickness of screw heads, shoulder lengths, etc. A most interesting feature of this tool is that additional anvils of various shapes can be made up, and many of these anvils do not have to be hardened for that “special job”.
Two hardened anvils furnished – round anvil approximately .120" diameter (3mm) and flat anvil approximately .125" (3mm) and.060" (1 5mm) thick
Item Specifications
-
L.S. Starrett
-
+/-. 0002"
-
Round & Flat
-
.001"
-
Carbide
-
0 - 1"
-
Ratchet